Parts List Saddle Rack 2¼ in. Machine Screws (2) Rope Hook (1) ¼ in. Washers (2) NyLock Nuts (2) Lag-Eye Screw (not shown) Dimensions: 14 1/2" Wide, 4 3/4" High, 24" Depth

A) Insert machine screws into rope hook.

B) Insert screws into top of saddle rack.

C) Rope hook should lay flush with saddle rack. If needed, tap bolts lightly.

D) Place washers with nuts from underside and tighten. DO NOT OVERTIGHTEN!

E) With 3/16 in. drill, pre-drill 2 in. guide hole into wall stud to receive lag-eye screw.

F) Insert lag-eye screw. Tighten, leaving about 1¾ in. lag-eye screw. extending from stud.

G) Take assembled saddle rack and insert rope hook into lag-eye screw. Saddle Rack should lay flush with wall. Minor adjustments may be made with half turns of lag-eye screw.

RACK-IT-TIER SADDLE RACK IS WARRANTIED FOR REPLACEMENT FOR ONE FULL YEAR.